2、 開蓋簡單容易，方便加料，安全性高。

2. It is easy to open the cover, convenient for feeding and high safety.

3、 節約能源，有效降低企業生產成本。

3. It can save energy and effectively reduce the production cost of enterprises.

4、 結構簡單易於維修。只需按照說明書的使用和維護指導即可自行維護。

4. The structure is simple and easy to maintain. It can be maintained by yourself only according to the instructions for use and maintenance.

熱熔膠噴膠機配套智能流量積算儀5、 壓力及流量可調整�？梢酝ㄟ^(guò)氣壓和噴頭的行程自由的控制噴膠流量。

Hot melt glue spraying machine with intelligent flow totalizer 5. Pressure and flow can be adjusted. Spray flow can be controlled freely by air pressure and nozzle stroke.

6、 熔膠速率快。采用高效保溫裝置。節約能源，提高熔膠速度。

6. The melting rate is fast. High efficiency heat preservation device is adopted. Save energy and improve the speed of glue melting.

7、 故障率低。結構清晰，元器件個部位施行最小系統連接。可靠性高。

7. The failure rate is low. The structure is clear, and the minimum system connection is implemented for each part of components. High reliability.

8、 操作溫度范圍大。使用溫度可以為20℃—200℃，在一定條件下可以使用在260℃。

8. The operating temperature range is large. The operating temperature can be 20 ℃ - 200 ℃ and 260 ℃ under certain conditions.

9、 可控制每次噴膠量�？梢赃x擇控制時間為0——60秒的多種時間控制器。

9. It can control the amount of glue spraying each time. A variety of time controllers with control time of 0-60 seconds can be selected.

10、針閥控制出膠瞬間關閉靈敏。采用氣開彈簧關方式，開關靈敏。

10. The needle valve can control the instant closing of glue. It adopts air opening and spring closing mode, and the switch is sensitive.

11、設備成本低，為企業節約前期投資。

11. The equipment cost is low, which can save the initial investment for the enterprise.

12、操作簡單，新晉員工只要10分鐘的培訓即能獨立操作本設備。

12. The operation is simple. The new staff can operate the equipment independently after 10 minutes of training.

13、提高產品性能和檔次。與普通熱熔膠槍比較，使產品粘合更牢固，效率更高。

13. Improve product performance and grade. Compared with the ordinary hot melt glue gun, the product is more firmly bonded and more efficient.

14、提高效率減少浪費。熔膠完畢后無需等待，隨時使用。不滴膠不漏膠，減少浪費。

14. Improve efficiency and reduce waste. No need to wait after the glue melt, ready to use. No drop, no leakage, reduce waste.

15、適用范圍廣、不受熱熔膠種類、形狀、黏度、溶化溫度、噴涂方式等限制。

15. It has a wide range of applications, and is not limited by the type, shape, viscosity, melting temperature and spraying method of melt adhesive.

16，新型熱熔膠機更具有不須加熱，直接加壓即可噴涂的功能。節能環保，經久耐用。有別于傳統需要加熱的熱熔膠機（加熱易產生酸值）。

16. The new hot melt adhesive machine has the function of spraying directly under pressure without heating. Energy saving, environmental protection, durable. It is different from the traditional hot melt glue machine which needs heating (acid value is easy to be produced when heating).