Product characteristics

The hose can be continuously on the back or top of the gun body. The hot-melt adhesive flows from the hose to the nozzle. When the air pressure pushes the piston upward, the rubber path is immediately opened, and the hot-melt adhesive is blown out of the nozzle by the air flow in the form of fiber.

edit

1. It is designed by melt blown technology applied in non-woven industry, with the glue consumption of only 50% of the spiral spray method under the same composite strength.

2. Be able to carry out intermittent and continuous glue spraying at medium or high speed. The glue spraying is fiber like, fine, with strong adhesion and even distribution.

3. High strength wear-resistant stainless steel nozzle has strong durability. Multi layer filtration technology is adopted to prevent blocking to the greatest extent.

4. The spray width is 25mm-2000mm, and the edge is controlled within ± 1.omm; other spray width can be customized as required.

5. It can be modified and applied to all brands of hot melt glue machines in the world according to the needs of users.

Product description

edit

1. Adopt solenoid valve, active gas on and off, with sensitive response speed

2. Imported fluorine rubber ring is used

3. The applicator design is novel, beautiful and generous

4. Built in filter screen, easy to maintain and simple

5. The sizing wire is fine and uniform, with strong structural force

6. Excellent control of sizing width to reduce spray

7. High strength steel sheet preheating device to ensure that the glue spraying is not affected by the external temperature